-
Why I treat Outlast fabric as an ingredient, not a product
-
The questions I ask before approving Outlast fabric clothing
-
Before adding a swimwear fabric supplier, ask about chlorine and elastane
-
Ripstop fabric specifications: do not order by the grid
-
Softshell fabric specification guide: what to put on the sheet
-
When Outlast is not worth the premium
Outlast is not a fabric you order by name. It is a temperature-balancing ingredient, and that ingredient only works when the fabric construction around it is specified correctly. I have been buying technical fabrics for a contract apparel manufacturer since 2020, and the same conclusion keeps appearing across Outlast clothing, swimwear, ripstop, and softshell: the supplier with the clearest test protocol is usually the supplier that delivers.
Let me state the bias behind this article. I am the office administrator and lead buyer for a 180-person apparel manufacturer. I manage roughly $2.4M in annual fabric purchases across 14 vendors. I report to operations and finance, which means I am close to both the engineering side and the invoice side. This guide is written from a purchaser point of view, not from a textile engineer or a fabric brand.
Why I treat Outlast fabric as an ingredient, not a product
Outlast is a phase-change material technology originally developed for NASA-related research. In a garment, it can absorb heat when your body is warm and release it when you cool down. That is genuinely useful in base layers, liners, gloves, and some outerwear. But it is not air conditioning. It has finite capacity, and it does not replace moisture management, insulation, wind protection, or breathability.
What most people don't realize is that two garments can both say Outlast and perform completely differently. The amount of active material, where it sits in the layer stack, and the base textile around it all change the result. A hang tag can say Outlast, but it cannot tell you whether the phase-change material is close enough to your skin to do anything useful.
So when I see a product described as Outlast material, I do not ask only what the fabric is called. I ask what construction it is in, how it is used, and what test evidence supports the claim.
The questions I ask before approving Outlast fabric clothing
Before we place a bulk order for Outlast fabric clothing, I ask the product developer and the supplier four questions.
- Where is the Outlast layer located? If the phase-change layer is buried behind thick insulation or separated from the body by a heavy barrier, the effect will be reduced. Outlast works best when it can experience the temperature swings of the human microclimate.
- What is the active loading? I do not expect a mill to reveal proprietary chemistry, but I expect a number or a range. Without it, I cannot compare one Outlast fabric to another. If the supplier refuses to give any loading information, I ask for a thermal performance test that shows a measurable difference.
- What is the base fabric construction? Outlast does not fix a fabric that is too heavy, too stiff, or lacking mechanical durability. The base textile still needs its own specifications: weight, stretch, tear strength, abrasion resistance, and finish.
- What wash durability evidence exists? Phase-change materials and coatings have to survive dyeing, finishing, garment sewing, and repeated laundering. I want a lab report with a clear wash-cycle method, not a vague statement that the technology is durable.
I also use a simple internal rule for any climate-related claim: if the supplier cannot explain what it regulates, how much it regulates, and for how long, then the claim is marketing, not engineering. (Note to self: I still need to turn this exact list into a reusable template for our design team.)
Before adding a swimwear fabric supplier, ask about chlorine and elastane
When I evaluate a swimwear fabric supplier, I focus less on print color and hand-feel and more on what happens after a few weeks in chlorinated water. Most buyers focus on per-yard price and completely miss the testing that prevents rejected goods later.
- Chlorine performance evidence. Ask for the test method. AATCC 162 for colorfastness to chlorinated pool water and ISO 105-E03 are common references. A fabric can pass a color test and still lose stretch recovery if the elastane breaks down, so I also ask about physical recovery after repeat exposure.
- Elastane specification. The word spandex is not enough. I ask whether the elastane is a chlorine-resistant grade and what performance data supports that claim. Swimsuit bagging is rarely a fabric weave problem; it is usually an elastane problem.
- UPF claims. If the garment will be marketed as sun protective, I need test documentation. Per FTC advertising guidance (ftc.gov), claims must be truthful, not misleading, and substantiated. I use that as a practical buying screen, not just a legal one.
- Lot-to-lot repeatability. A beautiful strike-off is one moment in time. I ask how the supplier controls shade, stretch, and finishing across bulk production runs. The question everyone asks is, What is your best price? The question they should ask is, What documentation comes with the bulk fabric?
There is something satisfying about finally finding a swimwear supplier who sends the lab reports before I have to ask for them. After chasing missing certificates and late test data in the past, that is the kind of service I now expect.
Ripstop fabric specifications: do not order by the grid
Ripstop is a weave construction, not a performance standard. The grid pattern helps stop tears from running, but it does not tell you whether the fabric is suitable for a pack, a shell, a workwear panel, or a liner. This is why I write out ripstop fabric specifications with the supplier instead of assuming the word ripstop means durable.
A starting ripstop spec sheet for our company includes:
- Fiber and yarn description. For example, 70D nylon 66 ripstop or 210D high-tenacity polyester ripstop. The denier and fiber type set expectations for weight and toughness.
- Finished weight and construction. Weight needs to be listed in grams per square meter or ounces per square yard, with a tolerance.
- Tear and tensile strength. We require a named method such as ASTM D1424 for tear or ASTM D5034 for tensile. A number without a method is not useful.
- Coating, lamination, and DWR. If the fabric is water-resistant or waterproof, I ask for the finish type, water column result, and spray-rating method. Coating adhesion and seam tape compatibility matter too.
- Abrasion or flex testing. If the end use is heavy-duty, I ask for a proof test rather than relying on a sample that feels tough in the hand.
Here is something vendors won't tell you in the first conversation: a sample is a sales tool. The bulk fabric may come from a slightly different finishing batch, dye lot, or coating run. That is why the purchase order has to be more specific than same as sample.
Softshell fabric specification guide: what to put on the sheet
Softshell is even easier to order incorrectly because it is not one fabric. It is usually a stretch face fabric, an optional membrane or coating, and some kind of brushed or knit backer. The final behavior depends on how those layers are bonded and finished.
When I write a softshell fabric specification guide for a new project, I include these fields:
- The full layer stack. Face fiber composition and construction, membrane type or coating chemistry, backer fiber, and lamination method if applicable. I do not accept softshell as a complete material description.
- Finished weight and tolerance. A 250 gsm softshell and a 350 gsm softshell are not interchangeable. Most suppliers can quote weight, but I need the finished weight, including any coating or lamination.
- Water column and breathability with test methods. 10K/10K is shorthand, not a spec. A 10,000 mm hydrostatic head result measured under one standard is not always comparable to another method. I ask for method names so I can compare honestly.
- Stretch and recovery data. Softshell should move with the body. I ask for stretch percentage at a defined load and recovery after repeated stretch or washing, not just a stretchy hand-feel.
- Delamination and wash durability. If the fabric is laminated, I ask what happens after home laundering. Does the face separate from the membrane? Does the backer peel? What is the test method and pass/fail limit?
- DWR and water repellency retention. A softshell may feel water-resistant on day one, but the real issue is how it performs after several washes. I ask for a water spray rating before and after a specified wash sequence.
If I plan to include an Outlast material layer in a softshell garment, I also ask where that layer will sit in the garment construction. It is much easier to make a temperature-balancing layer useful when it is close to the body or in a liner, not buried behind a waterproof membrane.
When Outlast is not worth the premium
I do not use Outlast in every product. It does not make sense in every cold-weather or technical garment.
- Heavy insulated parkas. If the insulation layer is thick enough, active phase-change material near the outer shell may not feel any temperature signal from the wearer. The cost is better spent on insulation and shell performance.
- High-sweat activewear. Outlast addresses heat storage, not sweat management. If the main comfort issue is drying speed, moisture-wicking fabric and venting design matter more.
- Extreme heat exposure. Phase-change materials can absorb heat only until their capacity is full. They are not active cooling systems.
- Claims without evidence. If a supplier says a product uses advanced temperature-regulating technology but cannot provide any supporting test data, I treat the claim as decoration.
To be fair, Outlast can be excellent in the right application. I have approved Outlast fabric for accessories and lined garments where the phase-change layer sits close enough to the body to matter. The technology is not magic, but it is useful when it is placed with intention.
Most buying mistakes happen because a brand name does the spec work. Outlast is a strong brand because it solves a real problem, but it should still be verified like every other functional layer. The same is true for swimwear, ripstop, and softshell. Name the test method, set a tolerance, and require evidence. If a supplier cannot reproduce the sample in bulk, you do not have an approved fabric yet; you only have a sample.