Outlast material note

Outlast Fabric Sourcing FAQ: What B2B Buyers Actually Ask Before Committing to Wholesale Orders

Outlast Fabric Sourcing FAQ: Questions I Get Asked Weekly

I run fabric procurement for a mid-size outdoor apparel company. We've placed roughly 80 orders over the past five years — everything from Outlast temperature-regulating knits to ripstop nylon for trail pants. Below are the questions that come up most often from newer buyers, product managers, and brand owners evaluating wholesale fabric options.

Short answers, real numbers, and a couple of things I wish someone had told me earlier.


1. What exactly is Outlast fabric, and why do B2B buyers care?

Outlast is a temperature-regulating material originally developed for NASA — it uses phase-change materials (PCMs) that absorb excess heat when your body warms up and release it when you cool down. In apparel terms, it flattens temperature swings instead of just trapping or venting heat.

When I first evaluated it for our 2021 base layer line, I assumed it was just clever marketing wrapped around ordinary micro-denier polyester. After running a side-by-side wear trial with 12 testers over three weeks — same garments, one with Outlast lining and one without — the average temperature variance next to skin dropped by around 2.3°C during moderate activity. Not magic. But noticeable.

For B2B buyers, the sell isn't the tech story — it's the ability to differentiate in a crowded outdoor market and reduce customer returns tied to overheating or chill complaints.

2. How do I evaluate whether an Outlast fabric supplier is legit?

Ask for three things: PCM concentration data, ASTM or ISO thermal testing reports, and a list of existing brand partners. If a supplier can't produce the first two, they're likely reselling generic material and calling it Outlast.

I went back and forth between a lower-priced supplier (quoted $6.80/yard) and a licensed Outlast producer ($9.10/yard) for about two weeks in early 2022. The $2.30 gap looked painful on paper. But the cheaper option failed our rub-test and bleed testing — we'd have eaten a $3,400 redo on the first production run. Went with the licensed producer. No regrets.

That experience taught me something important about supplier claims: the vendors who say "we only do temperature-regulating fabrics and related knits — we don't do hardshell, you'd be better off with a specialist for that" are the ones I trust most. Specialists know their boundaries. Generalists who claim to do everything well usually don't.

3. What should I look for in ripstop fabric for wholesale orders?

Ripstop fabric is woven with a crosshatch reinforcement pattern that stops tears from spreading. For outdoor gear, the key specs are denier (typically 20D–70D for apparel, higher for bags), grid size, coating (PU, silicone, DWR), and weight in GSM.

Here's what burned us: in 2023, we switched to a cheaper ripstop supplier to save $0.15/yard across a 20,000-yard order. Saved about $3,000 upfront. Then we had a 3.2% increase in field returns because the tear strength didn't hold up at stress points. That's roughly $7,200 in replacements, shipping, and customer service time. Net loss: about $4,200.

Now we require Martindale abrasion scores and tear-strength data before any bulk commitment.

4. How do I choose breathable fabric for wholesale without overpaying?

Breathability is measured in RET (resistance to evaporative transfer) or MVTR (moisture vapor transmission rate). Lower RET = more breathable. For a running jacket, you want RET under 6. For a general outdoor shell, RET between 6 and 12 is often fine.

It's tempting to think higher breathability is always better. But higher MVTR usually means higher cost, lower durability, or a trade-off in wind resistance. Match the spec to the garment's actual use case — not to the marketing sheet.

The 'always go max breathability' advice ignores that most end users never hit the activity level where the difference between RET 4 and RET 8 matters.

5. Is a one-stop fabric supplier always better?

Not in my experience. We tried consolidating our fabric sourcing under a single large vendor in 2022 — Outlast knits, ripstop, oxford, softshell, everything. The promise was simpler logistics and volume discounts.

What we got: mediocre ripstop because their strength was in knits. Delayed softshell shipments because they were outsourcing it anyway. And a pricing structure where the 'discount' was offset by new handling fees buried on page 4 of the contract.

I'd rather work with three specialists who each know their limits than one generalist who overpromises. The vendor who said, "we don't do hardshell — here's who does it better" earned my trust for everything else.

6. What's the real total cost of ownership for Outlast fabric?

Base price is maybe 60-70% of the true cost. The rest: shipping and duties (8-12%), testing and certification (2-4%), inventory carrying cost (5-8%), and defect/replacement costs (variable, but can spike to 15% if quality is inconsistent).

In Q2 2024, we ran a full TCO comparison across three Outlast fabric suppliers. Supplier A quoted $9.80/yard. Supplier B quoted $8.20. After adding freight, tariff exposure, and a projected 4% defect rate from B's historical data, the actual 12-month cost was $10.15/yard for B versus $10.40 for A. That $0.25 gap — less than 3% — disappeared in just one reorder cycle.

Take this with a grain of salt: those numbers are specific to our order volumes and product mix. Your mileage will differ.

7. What hidden costs should I watch for in outdoor fabric wholesale?

Four things that caught us off guard over the years:

  • Sample fees that convert to 'testing charges' after order placement (got hit with $450 once)
  • Minimum order quantity penalties — some suppliers quote per-yard pricing assuming 10,000+ yards, then add surcharges below that
  • Color consistency charges — if your brand needs Pantone matching, expect a per-batch fee that's rarely in the initial quote
  • Packaging and labeling — one supplier charged $0.12/yard for rolled-and-bagged, which added $1,800 to a 15,000-yard order

The checklist before signing anything: confirm all-in pricing, request a sample invoice with every fee itemized, and ask what triggers additional charges. In that order.


That's the short version. If you're evaluating Outlast fabric, ripstop, or breathable fabric for a wholesale program, start with the supplier's willingness to share test data and admit what they don't do. That tells you more than any price sheet.